Supplier Spotlight

Video Exclusives

VSS Unity spaceplane completes second test flight

Watch Virgin Galactic and The Spaceship Company's VSS Unity complete its second successful, supersonic, rocket powered test flight to an altitude of 114,500ft and a speed of Mach 1.9.

Click here to watch video

06 June, 2018



Space Launch System - in numbers

Discover how engineers are outfitting the world’s most powerful rocket with sensors, cables and other equipment in this 2:40 video.

Click here to watch video

15 May, 2018



Blue Origin launches and lands New Shepard rocket

Watch Amazon founder Jeff Bezos' space tourism company Blue Origin successfully launch and land a used rocket and capsule.

Click here to watch video

02 May, 2018



 

To watch more videos, click here

In which decade was the first military drone used?

News

Engineers use gold baffles to remove heat from Webb Space Telescope

 

Engineers reinstall one of the gold-plated baffles that helps direct heat away from NASA's James Webb Space Telescope (Image: NASA/Chris Gunn)

 

Engineers at NASA have fitted gold baffles to reflect away excess heat generated by the James Webb Space Telescope’s scientific instruments and electronics.

 

The James Webb Space Telescope (JWST) is the planned successor to the Hubble Telescope and is one of NASA's most complex and expensive projects.

 

The infrared telescope’s four science instruments are held within a support structure called the integrated science instrument module (ISIM), located behind the telescope's primary mirror.

 

The ISIM and Webb's optics form the science payload of the observatory. To keep heat away from the sensitive instruments, a majority of the electronics used to power and operate the instruments are housed in a compartment below the ISIM, where baffles direct the heat safely into space and away from any cold surfaces of the observatory.

 

The baffles act as mirrors to reflect the heat outward in a specific direction. This is the same technique used by Webb's mirrors, but instead of reflecting heat into space, they will guide infrared light to the telescope's scientific instruments.

 

Matthew Stephens, a mechanical systems engineer for Webb at NASA's Goddard Space Flight Center said, "Gold has a very high reflectivity in the infrared spectrum range, so it is ideal for directing heat. This is the same reason all of the primary, secondary, and tertiary mirrors are gold-coated."

 

Engineers have reinstalled the baffles, which had been previously removed and safely stored in a clean environment to protect them from any contamination during integration and testing of the science payload. The clear plastic sheets placed over the baffles will protect them from any contamination during the remaining integration and testing phases for the observatory.

 

The baffles had to be reinstalled before Webb's science payload and its spacecraft element are integrated at Northrop Grumman Aerospace Systems in Redondo Beach, California, where both halves of the observatory currently reside. If the engineers waited until after integration, Webb's tennis-court-sized sunshield will obstruct the ISIM electronics compartment and make reinstalling the baffles much more difficult.

 

The JWST was due to be launched in October 2018 on an Ariane 5 rocket, but was rescheduled in September last year by NASA to be launched between March and June 2019. Webb is an international project led by NASA with its partners, the European Space Agency (ESA) and the Canadian Space Agency (CSA).

 

June 6, 2018
 

 

 

Written by Ben Sampson


RECEIVE THE
LATEST NEWS


Your email address:



Read Latest Issue

Read Latest Issue

Web Exclusives

Marine Dumont, business development manager, Kistler Instruments outlines how innovation in dynamometers is enabling clearer images of Earth from satellites 
Click here to read more

Steve Drake, NDT market manager for Ashtead Technologies, describes how the rapid deployment of the latest borescope equipment to Africa helped a business aviation operator make tough decisions about a grounded aircraft 
Click here to read more

Hardware-in-the-loop systems have helped to reduce flight testing of Saab's latest fighter jet, writes National Instruments in this case study
Click here to read more

An experiment is set to be launched from the International Space Station this month which turns the normal approach to space on its head – instead of putting things into space, this experiment aims to test ways to take things out of space. 
Click here to read more

Ergonomics and human factors is vital in aircraft but can be overlooked during testing and development. Here Nick discusses the latest trends and developments in cockpit design and testing.
Click here to read more


Supplier Spotlight

Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the aerospace testing industry. Want to see your company included? Contact tom.eames@ukimediaevents.com for more details.

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the aerospace testing community? Good or bad, we'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to anthony.james@ukimediaevents.com

Submit Your Recruitment Ad

Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email ben.sampson@ukimediaevents.com